SOLD 2002 WRX built 296whp/265wtq

[BugeyeFTW]

This is one of the cleanest bugeye Subarus around. I bought the car in august 2011 from a guy in PA with 121k, found it on Autotrader, car has NO rust, only seen one buffalo winter. Car has been undercoated. Since then many parts have been replaced for maintenance and things I wanted to upgrade
Current mileage: 128k
Location: Orchard Park, NY, 14127. (Buffalo Area)

VIN: JF1GD296X2G506229

Engine:
Blouch 16g turbo
Grimmspeed Internal wastegate Bracket
Turbosmart Comp-gate 38mm external wastegate
650cc Bosch injectors
Walbro 255 pump
Grimmspeed 3-port EBCS
Tial BOV
Grimmspeed catless uppipe
CNT catless downpipe
Used catback from a local guy with an 06 STi
Had it mated to the downpipe, so I guess u can call it custom sounds NICE, super deeep
New Greddy Oil filter spacer housing (for oil pressure gauge)
New OEM radiator (other one had bad dents in front)
New radiator hoses
Fresh coolant with radiator install. (less than 2k ago)

Suspension/Brakes:
Cusco front strut bar
Cusco rear strut bar 3-point
New drilled and slotted rotors all around
Ceramic pads all around
New OEM struts with Tein lowering springs
New Steering Rack, and bushings
New right rear wheel bearing

Exterior:
Window tint 2% all around except windshield just 2% visor.
Tinted tail lights.
Seibon Carbon Fiber hood
17'' Kosei K1 TS wheels
Kumho Tires, treads low. One more summer season left.

Interior:
Defi 3 gauge pod Carbon Fiber
Defi boost gauge
Defi external temp gauge
Defi oil pressure gauge
JVC head unit with I-pod hook up.
STi floor mats

I might have forgotten a couple things.

Comes with set of OEM wheels and new winter tires, only one winter on them!

^ I never launched the car ever, due to the wrx 5-speeds they are known for glass transmissions. Plus the amount of miles on her. All of the new mods have less than 2k miles on them. Less than 2k Transmission flush; Grimmspeed transmission cocktail also Rear diff flush, new gear oil Redline Shockproof

Car was protuned at innovative tuning in buffalo I have the dyno sheet I cant post it online because I don't have a scanner. It made 296whp/265wtq @ 1.2 bar (so about 17.4 psi) I can provide the dyno sheet and lots of reciepts of the work done.

My asking price is: $9,000 price is NOT firm, negotiable
Call or text 716-570-2877 names ken

[IMG]http://www.*****.com/forums/attachment.php?attachmentid=22960&d=1339786305[/IMG]
[IMG]http://www.*****.com/forums/attachment.php?attachmentid=22962&d=1339786305[/IMG]