Thanks Thanks:  0
Likes Likes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: How to Change your guage color.

  1. Top Of Page | #1
    TOP SECRET etownshooter2005's Avatar

    User Info Menu

    How to Change your guage color.

    Step 1. Disconnect battery terminals
    Step 2. Lower the steering colum
    Step 3. Remove the 2 screws that hold the guage cover and remove cover
    Step 4. Remove the 3 screws that hold the gauge cluster in
    Step 5. Disconnect 3 electrical connectors on the top of the cluster and remove cluster


    *Remove clear plastic cover by pushing down on tabs.
    Remove trim.
    Remove plastic cover on the rear of gauges by pushing down on tabs on edge and in center of cover.
    pry up the little silver clamps that hold the gauges in.
    Push the gauges out On back of circuit board
    Using q tips and accetane remove the green film from desired areas.
    Re insert gauge faces and attach by pushing tabs back down on back of circuit board.
    Reattach circuit board cover.
    Reinstall trim
    Reinstall plastic cover.

    * I discovered that if you use LED bulbs it is not necessary to remove green film. It will Just be a darker blue*

    Step 6. Remove bulbs from cluster by turning ¼ turn
    Step 7. Rplace bulbs and reinsert to gauge
    Step 8. Reconnect electrical connectors
    Step 9. Reconnect battery terminals
    Step 10. Check bulbs for operation
    Step 11. Insert the 3 screws to secure gauge cluster
    Step 12. Inset cover
    Step 13. Reinstall 2 screws to secure cover
    Step 14. Return steering column to desired position

    Finished project


    Here is the video that I used

  2. Top Of Page | #2
    Basic Member

    User Info Menu

    we did ours on same day

  3. Top Of Page | #3
    Basic Member

    User Info Menu

    that was withthe sanding version not recommended lol see the difference

  4. Top Of Page | #4
    Basic Member

    User Info Menu

    so where did you get your bulbs from?

  5. Top Of Page | #5
    TOP SECRET etownshooter2005's Avatar

    User Info Menu


  6. Top Of Page | #6
    Basic Member

    User Info Menu

    What is the bulb # that is in the cluster?

  7. Top Of Page | #7
    TOP SECRET etownshooter2005's Avatar

    User Info Menu

    Quote Originally Posted by SWP 07 Hawk View Post
    What is the bulb # that is in the cluster?

    #73/74 twist locks is what i used

  8. Top Of Page | #8
    Basic Member

    User Info Menu

    Okay thanks

  9. Top Of Page | #9
    Basic Member

    User Info Menu

    How many bulbs is there that you replaced with led?

  10. Top Of Page | #10
    TOP SECRET etownshooter2005's Avatar

    User Info Menu

    i think i did 8 if i remember right. i know there are more bulbs then what i replaced but i didnt want to make turn signals and such turn blue so thats just me.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •