Thanks Thanks:  0
Likes Likes:  0
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 34

Thread: rebuild advice on 06 WRX

  1. Top Of Page | #11
    Basic Member

    User Info Menu

    BIG THANKS TO JORDAN AT DEFINED PERFORMANCE.

    well I got the parts ordered so as of tomorrow there is no turning back.
    CP Pistons - 9.0.1 standard bore
    Eagle H beam rods
    Sti crank
    New OEM water and oil pump
    Gates timing belt

    Pending :
    Bearings
    Tensioner

    Other than cleaning up the heads should I look into anything I should replace?
    I was planning on just re-using them.
    Last edited by taco15; 02-23-2012 at 12:46 AM.

  2. Top Of Page | #12
    Director HolyCrapItsFast's Avatar

    User Info Menu

    I would recommend a valve job, surface the deck and nice a bowl blending. But that's just me... At the very least you should have them surfaced and the valves lapped.


    Quote Originally Posted by taco15 View Post
    well I got the parts ordered so as of tomorrow there is no turning back.
    CP Pistons - 9.0.1 standard bore
    Eagle H beam rods
    Sti crank
    New OEM water and oil pump
    Gates timing belt

    Pending :
    Bearings
    Tensioner

    Other than cleaning up the heads should I look into anything I should replace?
    I was planning on just re-using them.

  3. Top Of Page | #13
    Basic Member

    User Info Menu

    thanks man.

  4. Top Of Page | #14
    Basic Member

    User Info Menu

    You should really be getting a full timing kit. Belt, tensioner, and rollers.

  5. Top Of Page | #15
    Basic Member

    User Info Menu

    I'm most likely going to since it's something suggested by many. I originally wanted to swap over those parts from my WRRX buttttttt.
    there's no use doing things twice and costing me even more headache down the road. luckily I work at Subaru so those OEM parts can be had quickly.

    As of now another shout out to Scott at Punisher Performance and Tuning for stepping up and doing my build.
    Of course non of this would be possible without Jj and this awesome group (s)

  6. Top Of Page | #16
    System Operator IGOTASUBARU's Avatar

    User Info Menu

    Thanks pal!
    Without you, we cease to exist. Without your support, we stop growing. Without your involvement, we remain at a standstill.
    Thank you for your faithfulness to our organization and your creative ideas and support.



  7. Top Of Page | #17
    Basic Member

    User Info Menu

    Well I picked up my block and already have it torn apart for Punisher Performance. All looks well!
    Pics coming up later tonight.
    Last edited by taco15; 02-27-2012 at 03:14 PM.

  8. Top Of Page | #18
    Basic Member

    User Info Menu

    Ready to go!



  9. Top Of Page | #19
    Basic Member

    User Info Menu

    update....
    got a good Subaru friend whom is moving and plans to return his subie back to stock and sell so i jumped on the oportunity to help and get me some parts too.
    900CC injectors
    Turbo XS FMIC
    Motion Lab tuning uppipe
    38MM External WG
    Garret T518Z with modded GT37 compressor

    goodbye VF39!....

    Punisher performance is almost done with my block and we should be metting each other very soon

    stay tuned!

  10. Top Of Page | #20
    Basic Member

    User Info Menu

    good luck to you. subscrib'd.

Page 2 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •