Thanks Thanks:  0
Likes Likes:  1
Results 1 to 5 of 5

Thread: New BMW M3 - Mineral White/Sahkir Orange gets the works

  1. Top Of Page | #1
    On vacation DetailersDomain's Avatar

    User Info Menu

    New BMW M3 - Mineral White/Sahkir Orange gets the works

    Subject: BMW M3 Mineral White/Sahkir Orange

    Requirements: New Car Prep - Full Front Xpel Ultimate Clear Film - Spring Installation - SS Lines - Spacers

    Here is a list of products used on the interior.

    1Z einszett Cockpit
    Leather Master Strong Cleaner
    Leather Master Barrier
    Auto Finesse Crystal Glass Cleaner
    1Z einszett Gummi Pflege Stift Rubber Care Stick

    Metro Jumbo Vac n Blow
    Uber Leather and Carpet Brush
    Uber Microfiber Towels
    Uber Microfiber Applicator Pad


    Products used on the exterior:

    1Z einszett Glanz Shampoo
    Uber Clay Bar
    Sonax Fall Out Remover
    Sonax Wheel Cleaner Plus
    Auto Finesse Oblitarate
    NanoSkin AutoScrub Mitt
    Sonax Perfect Finish
    Sonax Polymer Net Shield
    Adam's Super VRT
    Menzerna Top Inspection
    Auto Finesse Crystal Glass Cleaner

    Tools used
    Metro Jumbo Vac n Blow
    Uber Leather and Carpet Brush
    Uber Microfiber Towels
    Uber Microfiber Applicator Pad
    Uber Quick Detail MF Towels
    Uber All Purpose MF Towels
    Griot's 3 inch Random Orbital Polisher
    Rupes BigFoot LHR 21ES Random Orbital Polisher
    Rupes BigFoot LHR 15ES Random Orbital Polisher
    Uber Buffing Pads
    Defelsko Paint Meter
    Fenix TK35
    2 Grit Guard Buckets with Caddies
    Adam's Firehose Nozzle
    Metro Air Force Blaster


    Let's start with the interior clean up first.

    We pulled out all the wrapper and a few of the decals on the glass. Did a vac and wipe down with a cockpit cleaner, followed by a nice leather cleaning and conditioning to prevent denim transfer. Glass was done as well as door jambs were sealed.

    Before




    Removing the tags and wrapper left in the car






















    Leather cleaning and conditioning - even though the car is new I decided to clean with Leather Master Strong Cleaner followed with Leather Master Barrier to do some preventive maintenance to protect the leather from denim transfer.







  2. Top Of Page | #2
    On vacation DetailersDomain's Avatar

    User Info Menu

    Door Jambs cleaned and protected - Sonax Polymer Net Shield was used on the jambs


    Door seals cleaned and protected with 1Z einszett Gummi - great way to keep them fresh and new as well as during the winter months its keeps your doors from freezing shut.



    After shots








    Exterior

    Moving on to the exterior prep and Xpel Ultimate installation.

    Before shots









    Wheel cleaning - Sonax Wheel Cleaner Plus and various brushes


    Uber Boar's Hair Brush for the lugs


    Wheel Woolies for behind the spokes and the first 1/2 of the inner wheel barrels


    EZ Detail Brush for the back half of the wheels and in between the calipers and wheels - super tight especially with the stock 19's.


    Smaller Wheel Woolies for between the spokes


    Adam's Boulder Brush for the face of the wheels - super gentle.


    Rinse them off.





    Decon with Sonax Fallout Remover (it pulled up quite a bit of iron particles and fallout with only a few hundred miles on it)








    After all the decon wash pressure washed off we foam the car





    Rinse and blow dry



    With the darker/matte wheels I have found we always need to go back and hit them up with a detail spray to ensure they are perfectly clean.


    Washed and Dried - next up clay bar



    Making sure the car is perfect prior to the Xpel Ultimate Clear Film installation. A good polish with Sonax Perfect Finish and the Rupes LHR21 with Rupes Yellow Pad.


    After the complete prep we made sure all the areas that were getting protected with Xpel were cleaned a few times with an IPA wipe down.

    Areas being covered - front bumper, full front fenders, full hood, mirrors, headlights, a pillars, front of the roof, door cups, full side skirts, luggage area on the back bumper and behind the rear wheels on the rear bumper.





















    Some final touches -
    Glass cleaned after the Xpel Ultimate was installed -





    Getting the tires cleaned and dressed - using Stoner's Tarminator, Auto Finesse Obilitarate, Adam's Super VRT









    No after shots with the stock set up we went to Ben and Mark at Rogue Engineering for some goodies.

    Rogue Engineering installed H&R Springs, Rogue Engineering Spacers 12 mm, and Rogue Engineering Stainless Steel Brake Lines

    stock


    H&R


  3. Top Of Page | #3
    On vacation DetailersDomain's Avatar

    User Info Menu

    RE 12MM Spacers Front and Rear



    RE SS Lines



    Stock




    RE SS lines installed


    Back at DD it was cleaned it up and took some final shots.

    Inside







    Outside












    Hope you enjoyed it, email me with any questions about this write up or anything else detailed related.

  4. Top Of Page | #4
    System Operator IGOTASUBARU's Avatar

    User Info Menu

    Your write ups are so awesome!
    Without you, we cease to exist. Without your support, we stop growing. Without your involvement, we remain at a standstill.
    Thank you for your faithfulness to our organization and your creative ideas and support.



  5. Top Of Page | #5
    ShiftHappensLTi's Avatar

    User Info Menu

    Loooove it!

  6. Likes IGOTASUBARU liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •